What are the two ways to remove the windshield?

2024-07-29

Serial number

The second is to use a special broach for automobile glass. Just like the first method, the rubber part of the windshield glass trim strip is turned outward.

There are two ways to repair and remove the windshield:

One is to turn up all the rubber parts of the windshield decorative strip outward, then cut a small opening from the outside with a wallpaper knife at the lower corner of either side of the left and right sides of the windshield, and then use a "wire threader" to pass a 60-80cm long "multi-strand" or "single-strand" steel wire through the glass from the inside to the outside, put "steel wire handles" on both ends of the steel wire, and pull the steel wire, separate the glass from the bonding material and place it under the glass table.

The second is to use a special broach for automobile glass. Just like the first method, the rubber part of the windshield glass trim strip is turned outward. First, a small opening is made from the-pillar frame on either side of the car, and the glass is slowly cut along the body surface to remove the glass. Then slowly tear off the annual inspection and other labels so as to attach them to the new glass.

There is also a new removal tool called "winch". At present, there are two kinds of domestic and imported ones on the market, and the evaluation of domestic use is also mixed. However, there is no doubt that the use of new tools to repair greatly increases the professionalism of automobile glass installation, which will be very good from the customer experience, but from the point of view of tool price and installation market, the current utilization rate is not high, which may be a trend in the next few years.

Some friends feel that the glass is so adhered by glue, can the safety be guaranteed?

In fact, this kind of worry is unnecessary. The repair manufacturers have made precise calculations, and the strength of the car glue is very high, which can withstand a lot of pulling force, so you certainly don't have to worry about safety.

We have seen a lot of collision tests, the glass has broken, but the bonding place is intact, it can be seen that the bonding strength of the glass glue is still very strong.

Tag:


Recommend News